Data cabling for commercial sites in Melbourne

Cat6 and Cat6A structured cabling for offices, shops and fitouts, from the outlet back to the patch panel. Installed by an ACRS-registered open cabler with the structured cabling endorsement.

Electrical contractor
REC 35300Energy Safe Victoria
Registered cabler
ACRS A053773Open · fibre, structured, coax
Insured
$10M liabilityPublic and products
Google reviews
Read reviewsOn our Google profile
ACRS Master Cabler
What’s included

Data cabling: what we do

New data points

Cat6 or Cat6A runs to desks, ceilings, Wi-Fi access points and equipment, terminated at both ends.

Patch panels and outlets

Terminated to patch panels in the rack and to wall plates, floor boxes or ceiling outlets.

Additions and moves

Extra points added to an existing office, or points relocated for a refit.

Re-terminations and replacements

Faulty outlets re-terminated, and old or damaged cabling replaced.

Coaxial cabling

Coax runs for TV distribution and other coaxial systems.

Testing and labelling

Runs are tested and labelled at both ends to match the patch panel before handover.

How the work is done

Standards, sign-off and coordination

Cabling is installed to AS/CA S009:2020, the Wiring Rules for customer cabling in Australia, and kept separate from electrical cabling as those rules require.

At the end of the job you receive a signed cabling compliance statement (the ACMA TCA1 form) confirming the work complies with the Wiring Rules.

Because Near Electrical is also a registered electrical contractor, power for the comms rack, new outlets and UPS connections can be done in the same job, without bringing in a second trade.

For fitouts, cabling can be roughed in to the builder’s program and terminated at fit-off. Where an IT provider is setting up the network, cabling and patching follow their plan.

Who does the work

Licensed, registered and insured

Near Electrical Pty Ltd is run by Lewis Fraser, a licensed electrician and ACRS-registered open cabler. Data cabling and the electrical work that supports it come from the one contractor.

See full credentials · Read our reviews on Google

  • Registered electrical contractor, REC 35300
  • ACRS open cabling registration A053773, with optical fibre, structured and coaxial endorsements
  • $10 million public liability and products liability insurance
  • ACRS Master Cabler
Questions

Common questions

Does data cabling have to be done by a registered cabler?

Yes. In Australia, data and telecommunications cabling must be done by, or under the supervision of, a cabler registered under the ACMA Cabling Provider Rules. Lewis Fraser holds ACRS open registration A053773 with the structured cabling endorsement.

Should we use Cat6 or Cat6A?

Cat6 suits most offices. Cat6A supports 10 Gb/s over the full 100 metre channel, so it is a common choice for Wi-Fi access points and fitouts that need to last. The quote recommends one based on the site and what the cabling needs to carry.

Can you add points to an existing office?

Yes. New points are terminated into the existing patch panel if there is room, or a new panel is added if there is not.

Where do you work?

Melbourne metro. Regional Victoria by arrangement.

Quote

Request a quote

Hours
Monday to Friday, 7am to 5pm
Service area
Melbourne metro, including the CBD and inner, northern, eastern, western and south-eastern suburbs. Regional Victoria by arrangement.

Send your job details

Your details are used only to reply to your enquiry.